VT-Simple Trainer
₹1,650.00 – ₹3,399.00
The VT Simple trainer is a great first time airplane which had good gliding characteristics. The large wingspan with polyhedral helps with self correcting on the roll axis which lets beginner pilots take their time to build their reflexes. The Simple Trainer takes a 3S 1000-1200mah Lipo and an affordable 2822 sized motor.
- Description
- Additional information
Description
VT Simple Trainer
The VT Simple trainer is a great first time airplane which had good gliding characteristics. The large wingspan with polyhedral helps with self correcting on the roll axis which lets beginner pilots take their time to build their reflexes. The Simple Trainer takes a 3S 1000-1200mah Lipo and an affordable 2822 sized motor.
SPECIFICATIONS
- AUW: 500gms
- Weight Without Battery: 350gms
- Wing Span: 55in / 1400mm
- Length: 31.5in / 800mm
- CG Location: 58mm from the nose (Location marked)
RECOMMENDED EQUIPMENT
- Motor:1806-2300kv / CF2822-1200kv Brushless Motor
- ESC: 20-30 amp
- Battery: 1000- 1300 mAH 3s
- Servos: (2) 9 gram servos
- Prop: 8×4.7 / 9 X 4.7
WHATS INCLUDED IN THE KIT
- Fliteboard Pro (3 Nos)
- Aeroply Part sheet
- Pushrods (2pcs) ~65cm ea.
- Pushrod Guide (2 small)
- Pushrod Connectors (2)
- Velcro
- Paper knife
- Bamboo Stick (2 small)
- Latex Rubber Band(1pcs for landing gear)
- EPP Foam Wheel Set(2pcs)
- Heat shrink tube
- Landing gear wire 17″
- Wheel Collard (4pcs)
- Rubber bands for wing attachment (20pcs)
Laser Cut Fliteboard Pro Right Wing
Laser Cut FliteBoard Pro Left Wing
Laser Cut Flite Board Sheet
Kit Accessories
Kit Options - Electronics
Optional Electronics Pack Includes :
- DYS CF2822 1200 KV Brushless Motor
- 30A Electronic Speed Controller
- 2 Nos. TowerPro 9Gm Servos
- Propellor: 9×4.7
- 3 Pcs Male Bullet Connectors ( For Motor Leads )
- Heatshrink Tube Piece 4MM Red
- Heatshrink Tube Piece 4MM Black
- 15cm Servo Extension Cable
- Prop Saver with 2 Rubber Bands
BUILD VIDEO
Packaging & Shippng
All our kits are securely packaged to ensure they reach you safely. Lasercut Sheets are first shrink wrapped, small parts are sealed in plastic bags, and then the entire kit is bubble wrapped, before being put in a custom made 5-ply corrugated Box.
Shrink Wrapped for Protection
Bubble Wrapped for Further Protection
Shipped in Strong Corrugated box
All Kits are shipped via India Post. This is because, Private couriers charge based on Volumetric Pricing, which is often very expensive. We stand by our kits and guarantee that in case of any major damages during transit, or any manufacturing defects , we shall gladly help arrange replacements.
IndiaPost Service is a Trackable service, and we provide tracking details, usually within 1 working day.
Unbelieveble Value for Money. One of the cheapest ways to get in flying. Very stable, easy flying too. Extremely Happy. Thank you Vortex-RC
Additional information
| Weight | 3 kg |
|---|---|
| Power Pack | No Power Pack, With Power Pack |
